Tankless Water Heater Repair Roswell

Tankless Water Heater Repair Roswell Troubleshooting

Normally, most of the problems that could take place with a tankless water heater, triggering it to require a repair are external factors. Here are some of them:

Poor venting. The most typical error with a tankless installation is using regular B-vent, which can rapidly ruin the heat exchanger due to acidic condensation.
Wrong sized gas supply line. Sometimes the supply line is undersized and was simply attached to the existing line size. The size specified in the setup handbook has to be utilized.
The gas pressure is not right. The working pressure should be from 5 to 10 1/2 inches WC for Natural Gas and 9 1/2 to 14 inches for Liquid Propane, depending upon the model.
The wrong type of gas that is being made use of – natural gas or liquid propane. It is not possible to use the non-specified kind.
Water flow or temperature variation issues. There are numerous things we will examine to make sure they are working correctly, like cleaning or changing the input filter, analyzing the check valve, examining the seals in the faucets and looking to discover if there exists a cross flow someplace that has to be fixed.
Hard Water Problems: In locations where the water is very hard, de-scaling will be required occasionally.
Environmental concerns. The heaters should be installed in a clean area with access to combustion air that is devoid of dust, lint, grease, or chemicals.

Do not think twice to contact us of any difficulties you are having with your tankless hot water heater, or if you simply would like some information and facts on deciding if acquiring one might be a good fit for your property.

Tankless Water Heater Repair Roswell

Tankless Water Heater Repair Services Roswell GA

Back to Water Heater Repair Roswell GA